Hot Selling analog in Dante out 2CH Dante Audio Adapter
DO22 Main Features:
- DO22 supports Dante digital signal input, transfer 2 analog signal
output, Power supply for this product must be provided by Ethernet
(PoE) switch or router.
- Very Low Lantency
- Compact design, easy to use, support hot plug.
- Conversion between analog audio signals and Dante digital audio
signals is easy and free.
- Built-in 2 input or 2 output audio channels.
- Extend audio, control, Ethernet, and power with a reasonably priced
cable.
- One network cable instead of multiple analog or multi-core cables,
it is economical, efficient and versatile.
- Extend uncompressed high quality audio signals with near-zero dela
- Safe and reliable transmission of high-quality two-channel audio
- Dante IP AES67 RTP audio
- Supports Dante software, which can easily expand and configure
network and audio routing.
- It supports PoE and conforms to the line power supply function of
ieee 802.3af.
DO22 System View:
Specification:
| Model No. | DO22 |
Function | DO22 supports Dante digital signal input, transfer 2 analog signal
output, | | Channel | 2 ch Dante intput 2 ch analog outputs, | | Maximum signal level (balanced) | +18dBu / +4dBu / 0dBu | | 0dBV /-10dBV | | Frequency response | 20Hz to 20kHz (-/+0.5dB) | | Bit depth | 24 bit | | Impedance | 110 Ohm(Balanced) | | Dynamic Range | > 100dB | | SNR(Signal to Noise Ratio) | > 100dB | | THD | < 0.01%(+4dBu) | | Connector | RJ45 and 1 XLR-M RJ45 and 2 XLR-M | | Power Supply | Class 1 802.3af PoE | | Sampling rate | 44.1,48,96 kHz | | Latency | Depending on the configuration on the device or network, 1
ms(default) | | Network transmission | Dante IP AES67 RTP audio | | USB | - | | Device Information | | Weight | Gross Weight :0.75KG | | Dimension | 4.92 x 1.30 x 1.10 inch/ 125 x 33 x 28 mm (L x W x H) | | Power consumption | 2 Watts | | Operation temperature | 0~50OC [32~122F] | | Storage temperature | -20~60OC [-4~140F] | | Relative humidity | 20~90% RH [no condensation] |
|
Product Connect:
Follow the below steps to set up a Dante network for controlling.
- Download and install the Dante Controller from Audinate website (www.audinate.com).
- Connect the device to the switch using Dante network audio system
with network cable
- The analog audio transmission device is connected through the XLR
interface
- Search for devices in Dante Controller software, Select and open
the devices to be configured,On the Routing page, match the input
row with the output column with a custom check.
- Once set up and configured the audio routing between audio device,
the audio device will remember and save the settings.
FAQ:
Q1: Are you manufacturer or trade company?
A: We are manufacturer,which located in Shenzhen, Guangdong, China.
Q2: Do you offer OEM&ODM service?
A: Yes, We can provide OEM or ODM Solution depends on client
requirements
Q3: What's the quality standard of your products?
A: Our products has approved CE, ROHS certification.
Q4: Which place will use FHB equipment?
A: Our products are widely used in International Conference,
Governments, Banks, Churches, Airports, Parliaments, Education
institutes, Hotel, Private corporate conference hall etc,.
Q5: What’s the delivery time?
A:Sample order: During 5days,Bulk order:10-15days
Check Products one by one, to make sure all products are working
excellent quality..
