Integrated DSP audio processing and PoE power supply Dante signal
transmission mini DSP digital signal processor
Main Features:
- Support PoE power supply and DC12V dual power supply
- Built-in Dante module
- 4 balanced inputs + 4 balanced outputs
- The input supports 48V phantom power supply
- DSP processing functions include gain adjustment, 5 - stage
parameter equalization, compressor,.Mixer, 15 graphic equalization,
limiter, setting, etc
- Provide Windows platform /PAD client software
- Support PoE power supply and DC12V dual power supply
- Built-in Dante module
- 4 balanced inputs + 4 balanced outputs
- The input supports 48V phantom power supply
- DSP processing functions include gain adjustment, 5 - stage
parameter equalization, compressor,.Mixer, 15 graphic equalization,
limiter, setting, etc
- Provide Windows platform /PAD client software
Specification:
| Model No. | DB0404-C | | Dante Interface | 2 | | Simulated maximum gain | -6～36dB,6dB each,tota 7 level | | Digitalizing bit | 24bit | | Sampling Rate | 48k | | Frequency Response (20~20KHz) | ±0.2dB | | Phantom power (per input) | 48V | | Maximum level (input/output) | +10dBu /+14dBu,balance | | Total harmonic distortion + noise | ≦0.005% @4dBu | | Noise floor (A- weight) | -88dBu | | Input impedance (balance-type) | 20KΩ | | Output impedance (balance-type) | 100Ω | | System delay | 1ms | | Channel isolation @1kHz | 100dB | | Working Power Supply | DC 12V & PoE | | Working Temperature | -10-50℃ | | Size | 142X157*46mm |
|
Software:
Our designed PC version control software is the best tool for you
to monitor and operate the digital audio processor, which can be
used to edit and store scenes (such as meeting mode, artistic
performance mode, concert mode, etc.) according to the acoustic
characteristics of different functions. The system built-in lock
screen function, It can effectively avoid the occurrence of wrong
operation.
FAQ:
1. Power indicator light out?
A:When using adapter power, check that the adapter is connected
properly
B:When using PoE, check whether the switch supports 802.3af.
C:If the device is damaged, please contact the after-sales service
2. Audio input fault?
A:Check if the routing of the Dante Controller is correct
B:Check whether the input is a valid audio source
C:Check whether the phantom power supply of capacitive pickup
device is turned on.
D:Check if the input channel gain is too small.
3.Audio output fault?
A:Check whether the output device is working properly.
B:Check if the routing of the Dante Controller is correct
C. Check if the output channel gain is too small.
Check Products one by one, to make sure all products are working
excellent quality..
