With Gain Adjustment Dante 4 In 4 Out Transmitter Dante Audio
Processor Audio Matrix
Our Dante products line:
Dante DSP
Dante Interface:2CH Dante AVIO,2CH Dante Wall Plate,4CH Dante
Box,8/16ch Dante Interface
Dante Speaker Management processor
Dante DSP Amplifier
Dante PoE Microphone
Dante Speaker
Main Features:
- Support PoE power supply and DC12V dual power supply
- Built-in Dante module
- 4 balanced inputs + 4 balanced outputs
- The input supports 48V phantom power supply
- DSP processing functions include gain adjustment, 5 - stage
parameter equalization, compressor,.Mixer, 15 graphic equalization,
limiter, setting, etc
- Provide Windows platform /PAD client software
- Support PoE power supply and DC12V dual power supply
- Built-in Dante module
- 4 balanced inputs + 4 balanced outputs
- The input supports 48V phantom power supply
- DSP processing functions include gain adjustment, 5 - stage
parameter equalization, compressor,.Mixer, 15 graphic equalization,
limiter, setting, etc
- Provide Windows platform /PAD client software
Specification:
| Model No. | DB0404-C | | Dante Interface | 2 | | Simulated maximum gain | -6～36dB,6dB each,tota 7 level | | Digitalizing bit | 24bit | | Sampling Rate | 48k | | Frequency Response (20~20KHz) | ±0.2dB | | Phantom power (per input) | 48V | | Maximum level (input/output) | +10dBu /+14dBu,balance | | Total harmonic distortion + noise | ≦0.005% @4dBu | | Noise floor (A- weight) | -88dBu | | Input impedance (balance-type) | 20KΩ | | Output impedance (balance-type) | 100Ω | | System delay | 1ms | | Channel isolation @1kHz | 100dB | | Working Power Supply | DC 12V & PoE | | Working Temperature | -10-50℃ | | Size | 142X157*46mm |
|
Software:
FAQ:
1. Power indicator light out?
A:When using adapter power, check that the adapter is connected
properly
B:When using PoE, check whether the switch supports 802.3af.
C:If the device is damaged, please contact the after-sales service
2. Audio input fault?
A:Check if the routing of the Dante Controller is correct
B:Check whether the input is a valid audio source
C:Check whether the phantom power supply of capacitivepickup device
is turned on.
D:Check if the input channel gain is too small.
3.Audio output fault?
A:Check whether the output device is working properly.
B:Check if the routing of the Dante Controller is correct
C. Check if the output channel gain is too small.
Packing List:
Device X1；
12V/2A DC Power X1;
Cabinet mounting bracket X2(optional );
6PIN connection plug x4;
Screwdriver X1;
Quick Guide X 1.
Check Products one by one, to make sure all products are working
excellent quality..
